Product Selection, Project Engineering and Modification
12
133285 / 8118609300
2019-11-13·BA00·III·en·06
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Terminal Boxes
Series 8118/1, Series 8118/2
5.2.2 Fitting of Attached Components by the Customer
Selecting add-on components
We recommend fitting the following add-on components to the enclosure:
Cable entry
• For electrical lines that are permanently installed: Cable entries for electrical lines that are
permanently installed
• For electrical lines that are not permanently installed: Cable entries with strain relief.
Sealing unused entries
• Use stopping plugs that comply with the type of protection required.
Draining and equalising pressure
• Breather.
Equip the device carefully and in accordance with the safety notes (see "Safety" chapter).
Refer to the specifications on the device's rating plate to help you determine which
components and seals to use and what operating temperatures they will need to be able
to withstand.
Calculate the usable area (collision frame) for add-on components,
see Chapter 5.1.2 and 5.2.2.
Make the diameter of the drilled holes match the dimensions of the built-in parts or their
seals.
The use of add-on components with a flat seal (gasket) is preferred.
Содержание 8118/1 Series
Страница 49: ......