MOUNTING INSTRUCTIONS
3200 SERIES OWNER’S MANUAL
! CAUTION !
Improperly mounted cranes can injure people or damage property. These instructions describe installation of a
s
crane on a typical
s
service body. Contact the dealer for other service body/truck chassis
combinations.
! CAUTION !
The truck chassis must be capable of safely supporting the entire chassis, body, crane, other equipment and the
maximum capacity of the crane - 3200 pounds.
s
3200 cranes must be installed on a truck chassis with a GVWR of at least 8000 pounds. The GVWR must
exceed the curb weight of the complete vehicle by at least the rated load of the crane (3200lbs). The curb weight
is the total weight of the chassis, body, crane, and other equipment. (See example below.)
GVWR = 8800LBS
CURB WT. = BODY WT. (1200 LBS) + CRANE WT. (800 LBS) + CHASSIS WT. (3500 LBS) = 5500 LBS
GVWR (8800 LBS) – CURB WT. (5500 LBS) = 3300 LBS > 3200 LBS
! CAUTION !
Never attach, change, or use unauthorized components on your
s
crane. This could result in failure
of the crane and/or possible injuries and voids any warranty or liability
.
! CAUTION !
MOST SERVICE BODIES ARE NOT STRONG ENOUGH TO MOUNT A CRANE!
You must reinforce the compartment and floor before you mount the crane. Get help from the truck dealer or
distributor if the
s
3200 crane is installed on a non-
s
body, in another body/chassis combination or
in a different location. It is recommended that a
s
crane body and outriggers be used with the 3200 crane.
Consult the distributor for the proper body required for your application.
14
s
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
