MOUNTING INSTRUCTIONS
3200 SERIES OWNER’S MANUAL
! CAUTION !
-DISCONNECT NEGATIVE BATTERY CABLE BEFORE PROCEEDING-
5.
Run the power lead to the front of the truck. Locate the lead so that it will be protected. Install cable clamps
to hold the wire securely in place.
6.
Connect the power wire to the positive terminal on the vehicle battery. A 250-amp in-line circuit breaker is
required near the battery to protect harness from electrical shorts.
7.
Reconnect the negative battery cable. The 3200 crane is self-grounding and does not require an additional
ground cable.
! CAUTION !
IF THE POWER WIRE IS ROUTED SO THAT IT PASSES THROUGH ANY BODY OR CHASSIS SHEET METAL, A
GROMMET MUST BE USED TO PROTECT WIRES FROM BEING CUT. IF THE POWER WIRE COMES INTO CONTACT
WITH A GROUNDED SURFACE, A DEAD SHORT WILL OCCUR POSSIBLY CAUSING DAMAGE TO THE CRANE,
VEHICLE BATTERY OR ELECTRICAL SYSTEM.
16
s
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com