INSTALLATION AND USER MANUAL
200TDHW
13
V0REV1EN0218
11.2.
Installation
After full installation of the water heater (power and water pipes connected) and after the water
heater tank is full of water, power can be turn ON. All segments of the LCD display are set ON for few
seconds.
At first initial power ON, the product goes, by default, in Eco mode with blinking horizontal segment.
Blinking segment indicates a first installation or a power shut down exceeding 24h. By pressing any
key, default set temperature will be display.
At first installation or after a long power cut-off it is recommended to setup the time clock. (Select
with Mode button, “TIME” mode to initialize the time)
11.3.
Mode selection
The 200TDHW unit has 7 modes :
To move from one mode to another, press shortly
button. Few seconds after your last selection,
the default value associated to your mode will be display.
