Page
ST315B User Handbook
8
Note: to exit programming without cycling through all of the above steps wait 10
seconds without pressing any keys
-
the ST315B will revert to the idle display.
Alternatively press the START/STOP key to exit programming and to begin firing
immediately.
Pr
ogram
ming
°C
°C/hr
hr.min
Data entry is terminated if
is selected for a
ramp rate with the
key. Data entry is also
automatically terminated if 9 segments have been
entered.
Note: the
key can be used to reverse through the programming steps to correct
errors or to exit programming mode.
Note: available ramp rate displays are:
,
…
&
.
If
is
shown but another segment is required then push the
key to obtain the
required ramp rate (in the range 1°C/hr to 999°C/hr). If full power is required
then push the
key until
is diplayed.
