Check that the package is intact and has not been damaged during transport. ● A heavy shock and the use of unsuitable tools
can cause the damage of the external or internal parts of the motor. ● Do not pierce or tamper with the motor in any way. Do not
modify or replace parts without the Manufacturer's permission. ● Do not handle the motor by the power cable. If the power cable
is damaged, the product cannot be used. Do not attempt to replace the power cable. ● Make sure that screws required to
complete the installation do not come into contact with the motor. ● The motor must be of power adequate to the charge (check
the rating plate data on the motor). ● Some programming phases and/or normal operation leverage the mechanical stops of the
rolling shutter. It is essential to select the motor with the torque deemed most suitable for the application, considering the actual
traction of the rolling shutter; therefore, we recommend avoiding very powerful motors. ● Use coilers with a minimum thickness
of 10/10. ● Leave 1-2 mm clearance on right/left on the coiler. ● Check that the drive pulley and the adapter crown are of shape
and dimensions appropriate for the coiler used. Motor accessories, adapters and supports must be selected exclusively from
the STAFER catalogue. ● If the product is installed at a height of less than 2.5 m from the floor or other supporting surface, it is
necessary to protect the moving parts with a cover, in order to prevent accidental access. In any case, guarantee access for
maintenance operations. ● The power cable must be positioned in such a way as to avoid contact with moving parts. ● The
product power cable is suitable for indoor installation only. If installing outdoors, lay the cable in a protective tube. ● If there are
several radio appliances in the same system, make sure they are at least 1.5m apart. ● Do not install the product near metal
surfaces. ● Position the buttons in view of the rolling shutter, but away from its moving parts. Place the buttons at a height greater
than 1.5 m from the floor. ● The motors are designed for residential use; they are designed for a continuous maximum work time
of 4 minutes. ● During operation, the motor body reaches high temperatures: use caution. ● The motor is internally fitted with a
self-restoring thermal safety device, which stops the motor in the event of overheating. The motor returns to normal operation
when its temperature drops below the safety limit (normally from 5 to 10 minutes). ● The motor must be installed in such a way
that it does not come into contact with liquids and, in any case, in a location protected from the elements. ● The antenna cable is
subjected to mains voltage. It is forbidden and dangerous to tamper with the antenna cable. Replace the product if the antenna
cable is damaged. ● For your safety, do not work near the coiler while the motor is powered.
The product is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they are supervised or given instructions about the product way of use by a person
responsible for their safety. ● Before operating the rolling shutter, make sure that people or things are not in the area affected by
the movement of the rolling shutter. Check the automation during operation and keep people at a safe distance until the end of
operation. ● Do not allow children to play with the appliance or with control devices. ● Do not operate the rolling shutter when
maintenance operations are being carried out (e.g. window cleaning, etc.). If the control device is automatic, disconnect the
motor from the power line.
02.2 Installation warnings
02.3 Use warnings
02
02. WARNINGS
Incorrect installation can cause serious injuries. ● Keep these instructions for future maintenance operations and the disposal of
the product. ● All the product installation, connection, programming and maintenance operations must be carried out only by a
qualified and skilled technician, who must comply with laws, provisions and local regulations, and the instructions provided
herein.● Wiring must comply with current CEI standards. In compliance with the provisions of Italian Ministerial Decree 37/2008,
the final electrical system must be installed only by an electrician. ● Some applications require “man present” operation and can
exclude the use of radio commands or require particular safety devices. ● To prevent potentially dangerous situations, regularly
check the operating condition of the rolling shutter/awning.
02.1 Safety warnings
MENU
PROG
sun/wind sensor function
third limit switch function
Back of remote control
Back of the remote control,
inside the battery compartment.
596.T.X1.00
596.T.X5.00
595.T.X1.00
PROG
button
Back of remote
control
LED
595.M.X1.00
Back of button
LED
01.1 Remote control “function” buttons
PROG
button
