06
10. FINE-TUNING OF UPPER LIMIT SWITCH
(*) The buttons must be pressed shortly, max 1 second between two pressures.
01. Bring the motor to the intermediate position.
02. Press
MENU
with 596. Display shows: - - . Press 3 times on
PROG
* with 595. The motor moves up/down.
03. Press
DOWN
once. The 596 display shows 01.
04. Press
STOP
. The motor performs a brief up/down movement.
05. Press
UP
. The motor moves to the upper limit switch. Wait until it stops.
06. Adjust the new position with
UP / DOWN
.
07. Once you have found the position, press
PROG
. The motor performs a brief DOWN/UP movement.
08. Press
MENU
with 596. Press 3 times on
PROG
* with 595.
10.1 USING THE REMOTE CONTROL
01. Bring motor to the upper limit switch.
02. Turn off the power, wait a few seconds, then power up again.
03. Within 15 seconds, briefly and quickly press
UP 3 times
and
DOWN 3 times
. The
motor completes 1 UP/DOWN movement.
04. Within 15 seconds, briefly press
UP once
.
The motor moves to the upper limit switch. Wait until it stops.
05. Adjust the new position with
UP / DOWN
.
06. Once positioned, wait 5 seconds.
The motor completes 1 down/up movement. Limit switch setting stored!!
10.2 USING COMMAND BUTTONS
WARNING:
Fine-tuning of the upper limit switch is not possible if the limit switch has been set by contact with a stop plate.
3 x PROG
Wait for 5
seconds
12
3
9
6
1 x SU
ON
3 x DOWN
Item 596
Item 595T
MENU
3 x UP
11. FINE-TUNING OF LOWER LIMIT SWITCH
(*) The buttons must be pressed shortly, max 1 second between two pressures.
01. Bring the motor to the intermediate position.
02. Press
MENU
with 596. The display shows - - / Press
PROG
* 3 times, with 595. The motor moves up/down.
03. Press
DOWN
once. The 596 display shows 01.
04. Press
STOP
. The motor performs a brief up/down movement.
05. Press
DOWN
. The motor moves to the lower limit switch. Wait until it stops.
06. Adjust the new position with
UP / DOWN
.
07. Once you have found the position, press
PROG
. The motor performs an UP/DOWN movement.
08. With the 596, press
MENU
. / With the 595, press
PROG
. 3 times*.
11.1 USING THE REMOTE CONTROL
01. Bring motor to the upper limit switch.
02. Turn off the power, wait a few seconds, then power up again.
03. Within 15 seconds, briefly and quickly press
UP 3 times
and
DOWN 3 times
.
The motor completes 1 UP/DOWN movement.
04. Within 15 seconds, briefly press
DOWN once
.
The motor moves to the lower limit switch.
05. Adjust the new position with
UP / DOWN
.
06. Once positioned, wait 5 seconds.
The motor completes 1 up/down movement. Limit switch setting stored!!
11.2 USING COMMAND BUTTONS
Wait for 5
seconds
12
3
9
6
1 x DOWN
ON
3 x DOWN
3 x UP
Advanced Info
12. BUTTON LOGIC
12.1 USING THE REMOTE CONTROL Item 596
The command buttons can work in PULSE logic or in MAN PRESENT logic.
PULSE:
to move the motor, press a button for at least 0.5 seconds, to stop the motor, briefly press (less than 0.5 seconds) one of the two buttons.
MAN PRESENT:
to move the motor, press a button for at least 0.5 seconds, release the button to stop the motor.
The factory sets the motor to work in PULSE logic. To modify this parameter, follow the instructions provided below.
10.1 UTILIZZANDO IL TRASMETTITORE (solo Atom e Leg)
01. Bring the motor to the intermediate position.
02. Press
MENU
. The motor performs an up/down movement. Display shows: - - .
03. Press
4 times on DOWN
. 04 appears on the display.
04. Press
STOP
. The motor shows:
1 UP = man present, 1 DOWN = pulse.
05. To select “Pulse”: press
DOWN
To select “man present”: press
UP
06. After pressing, the motor shows:
1 UP = man present, 1 DOWN = pulse.
07. Press
MENU
to exit.
10.1 UTILIZZANDO IL TRASMETTITORE (solo Atom e Leg)
01. Bring the motor to the intermediate position
02. Press
3 times on PROG
*. The motor performs an up/down movement.
03. Press
4 times on DOWN
. The motor performs an up/down movement.
04. Press
STOP
. The motor shows:
1 UP = man present, 1 DOWN = pulse. Advanced Info
05. To select “Pulse”: press
DOWN
.
To select “man present”: press
UP.
06. After pressing, the motor shows:
1 UP = man present, 1 DOWN = pulse.
07. Press
PROG 3 times
to exit.
12.2 USING REMOTE CONTROL Item 595
01. Bring the motor to the intermediate position.
02. Turn off the power, wait a few seconds, then power up again.
03. Within 15 seconds, briefly and quickly press
UP 3 times
and
DOWN 3 time
s*.
The motor performs an up/down movement.
04. Within 15 seconds, briefly and quickly press
DOWN 4 times
.
The motor shows: 1 UP = man present, 1 DOWN = pulse.
05. To select “Pulse”: briefly press
DOWN
.
To select “Man present”: briefly press
UP
.
06. The motor shows: 1 UP = man present, 1 DOWN = pulse.
07. Wait for 5 seconds. The motor exits the menu without any movement.
12.3 USING COMMAND BUTTONS
(*) The buttons must be pressed shortly, max 1 second between two pressures.
Wait for 5
seconds
12
3
9
6
4 x DOWN
ON
3 x DOWN
3 x UP
Item 595M
3 x PROG
Item 596
Item 595T
MENU
Item 595M
