English
VARIABLE TEMPERATURE KETTLE “KETTLE TWO”
Congratulations on the purchase of your Variable Temperature Kettle which
is designed with quality SCHOTT DURAN glass and includes many features
that will help you brew the perfect cup of tea.
IMPORTANT SAFETY INSTRUCTIONS
Read carefully and save all the instructions provided with an appliance.
• This appliance must not be used for anything other than its intended pur-
pose.
• The outside surface will get very hot during use. Always hold the handle
when the kettle is filled with hot water. Please take great care when han-
dling your kettle.
• Do not switch the kettle with open lid in order to avoid an injury or hazard-
ous situations. Do not open the lid when the kettle is operating.
• Place your kettle on a stable, horizontal and level surface.
• Do not operate the appliance in the presence of explosive and/or flam-
mable liquids or fumes.
• Do not operate the appliance in damp or wet locations. This appliance
must not be placed on or near any objects that heat up (such as a gas or
electric hob). Keep it away from the direct sunlight.
• Do not use the appliance if the mains lead or extension cord is damaged
or overloaded.
• Always make sure the appliance is off before you unplug it or before
cleaning.
• In order to avoid electrical shock hazard, do not touch the plug by wet
hand. When removing the plug from the wall socket hold it by the body.
• Ensure that the mains cord of the kettle is kept away from the surfaces
which can damage it, do not kink the mains cord and never place inap-
propriate objects on it.
• Do not use the appliance if the plug, the mains cord or the appliance itself
is damaged. If the mains cord is damaged, you must have it replaced by
a service center specialist or similarly qualified person in order to avoid
a hazard.
• Never immerse the kettle, mains cable, the plug, or base unit in water or
any other liquid.
• Never use abrasive cleaning agents and/or chemically aggressive liquids
(such as petrol or acetone) to clean the appliance.
• This kettle is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instructions
by a person responsible for their safety.
• There are no user-serviceable parts inside – refer to qualified service per-
sonnel. Never temper your kettle!
• In order to avoid a hazard, do not operate the kettle if the mains cord or
plug are damaged, or if the appliance malfunctions or is damaged in any
way. Please refer to your service center.
• A the end of life do not throw away the kettle, but hand it in at an official
collection point for recycling.
• Save this user’s manual, guarantee leaflet and sales receipt. Please hand
over the documents in case you will present this kettle to another person.
DESCRIPTION
1.
Lid handle
2.
Kettle lid
3.
LED display
4.
Temperature down button«-»
5.
Temperature up button «+»
6.
Keep warm button
7.
ON/OFF button
8.
Handle
9.
Glass body
10.
Base. Rotation by 360° on the base due to the central location
of the contact set; the power cord storage
11.
Filter
OPERATION
Before using your kettle.
It is recommended that you clean your kettle before using it by filling the
kettle with water to the maximum level indicator, boiling the water and dis-
carding. Important: Do not fill the kettle over the maximum level, as water
may spill out of the spout when boiling.
1. To fill the kettle, remove it from the power base and lift the lid, by pres-
sing the button at the top of the handle. Do not fill the kettle below the
‘min’ indication.
2. Fill the kettle with the desired amount of water. Always fill the kettle
between the minimum and maximum marks. Too little water will result
in the kettle switching off before the water has boiled.
3. Push the lid closed firmly until it locks into position.
4. Place the kettle onto the power base. Plug the power cord into a 220-240
Volt AC power outlet and switch the power on.
Using your Kettle
1. Connect your kettle to the power supply.
2. Remove the unit from base, open the lid and fill the kettle with cold wa-
ter, do not overfull beyond the max. level (1.7 l).
3. Close the lid tight and place the kettle on the base. When putting the
kettle on the base a long buzzer sounds - it means that the kettle is on
and is on stand-by mode. The stand-by mode allows setting the water
temperature of heating.
