P a g e |
12
P a g e |
Charger Status
Lights
◀
◀
◀
Battery Information
Label
◀
◀
◀
Battery Terminal
Location
Battery Release
Button/Latch
CHARGING THE BATTERY:
Remove the battery from the cycle. Plug the charger into an outlet and slide the
battery into place on charger.
New batteries can take longer to charge. Allow the battery to charge until the green
LED is solid before removing the battery from the charger. A flashing green status
LED indicates the battery is in the final stage of charging which includes cell balanc-
ing, which is very important to the life of the battery. If both the red and green LEDs
are flashing there is a problem with the battery or charger. Remove the battery and
unplug the charger, and repeat the charging process. Remove the battery from the
charger when charging is complete.
BATTERY CHARGER:
Without Battery Installed:
•
Flashing green LED = power from outlet present
With Battery Installed:
•
Solid green LED = charging complete
•
Flashing green LED = charging in process;
more than 80% charged
•
Solid red LED = charging in process; less than 80% charged
•
Flashing red LED = battery too hot to charge
•
Flashing red and green LED = error detected;
remove and reinstall battery
