40828-2203
5 14
SECURING THE SAFE
IMPORTANT: When you drill out the fire
you must mount the safe to the floor using the
lag bolts and gasket washers. Failure to do so
The safe must be fastened to the floor using
the lag bolts and gasket washers provided
with this safe to insure the waterproof
IMPORTANT: You must remove the safe from
the skid/legs and place the safe on the floor.
Failure to do so will void the fire and
WARNING: Because this safe is
waterproof it will float if not
secured. As the water level rises,
the safe will begin to float and could
fall over causing personal injury.
filled with fire resistant caulking which must be
Use a 3/8" diameter drill bit to drill out this
Drill pilot holes in the floor as follows: For a
wood floor drill 5/16" diameter x 2-1/2"
deep pilot holes. For a masonry floor drill 7/16"
diameter x 2-1/2" deep pilot holes for
the anchors.
the lag bolts and gasket washers. Replace
NOTE: This safe must be secured to the floor.
Use the hardware provided.
NOTE: This safe must be mounted to the floor.
Failure to do so will compromise the safety and
security of the safe.
SHELVES
GUN REST INSTALLATION
shelf in place.
Gun rests are pre-installed with (4) L brackets
using (2) screws for each bracket. The gun rest
when accessing your guns.
Gun rests can be adjusted by removing the
L brackets and securing them at a different
Image does not
necessarily
reflect the
your safe.
1
2
DOOR ORGANIZER ACCESSORIES
Your door organizer provides a variety of storage
Note: Make sure the door accessories do not
interfere with items in the safe or when closing
the safe door.
1
2
