NOTE: If you press the wrong number while
entering a security code, you can press “ ”
to erase that entered number.
ENTERING YOUR SECURITY CODE
LOCKING THE SAFE
To lock the safe, close the door and rotate the
mechanism will not lock.
NOTE ON LOCKING THE SAFE: Because the
entered to lock the safe.
40828-2203
3 14
To enter your own security code you will need
to follow the steps listed below:
preset factory code of 1 - 5 - 9 - # locate the
near the hinge.
it, you will hear a beep. The yellow light on the
your code. You can only enter your code while
the yellow light is on.
If the incorrect security code is entered
15 seconds before you can try your code again.
you can try your code again.
With the door open and the yellow light on,
enter your own personal security code, which
can be 3 - 8 digits long, and confirm your new
code by pressing the "
#
" symbol on the
electronic touch pad. Before you close the
door, try the new security code to make sure
the lock releases the handle so you can turn it
DO NOT SHUT THE DOOR UNTIL YOU HAVE
CONFIRMED THAT YOUR NEW SECURITY CODE
HAS BEEN ENTERED AND WORKS CORRECTLY.
the keypad, then enter the security code you
have set followed by the "
#
" symbol.
If the code fails, go through steps 1 and 2 again.
If the code works successfully record your
stackon.com under Customer Service. If you
children, not inside the safe. Then you should
close and lock the safe.
BACK UP KEY
A "Back Up Key" has been provided in case you
open the safe using the back up key follow the
steps below:
1. Remove the lock face by pressing the tab and
turning the lock face as shown in the
2. Insert the key in the key hole and turn
unlock the safe. Rotate the handle and open
the door.
new security code. Before entering your new
code, remove the key and screw the cover back
in place.
4. Enter your new security code following the
TAB
