Activate channel scanning
1. Push the
MENU
key five times:
SC
is displayed
and the channel
number
i
s flashing.
2. Start the scanning by means of the
s
or
t
key.
Deactivate channel scanning
To deactivate scanning you push the
PTT
key: scanning will stop and
SC
is no longer displayed.
Activate CTCSS scanning
1. Push the
MENU
key six times:
SC
and
CTCSS 00
are flashing.
2 Start the scanning by means of the
s
or
t
key.
Deactivate CTCSS scanning
To deactivate scanning you push the
PTT
key: scanning will stop and
SC
and
CTCSS
are no longer displayed.
Activate DCS scanning
1. Push the
MENU
key seven times:
SC
and
DCS 00
are flashing.
2. Start the scanning by means of the
s
or
t
key.
Deactivate DCS scanning
To deactivate scanning you push the
PTT
key: scanning will stop and
SC
and
DCS
are no longer displayed.
Call tone
Push the call key
call
to send out a tone call that is received by the
partner station.
TX
is displayed. You can select between 10 different
call tone melodies.
Selection of the call tone
1. Push the
MENU
key eight times: the symbol
CA
is displayed and
o1
is flashing.
2. Select one of 10 different call tones by means of the
s
or
t
key.
3. Validate by means of the
PTT
key: the display turns to normal mode.
Roger beep
After release of the
PTT
key the radio set transmits automatically a
beep tone. This is a signal for your partner that you have finished your
message and that the channel is free for an answer (helpful if trans-
mission is interfered).
28
