2. Select the desired digital code by means of the
s
or
t
key.
3. Validate the digital code by means of the
PTT
key.
Deactivate digital code
1. Push the
MENU
key three times: the selected digital code is flashing.
2. Select the
00
by means of the
s
or
t
key.
3. Validate the
00
by means of the
PTT
key.
VOX function (phonetic transmission)
This function permits to send without activating the transmit key:
Voices/noises that hit the microphone thus switch on the transmitter
of the radio set.
Adjust the sensitivity according to the environmental noises, so that
the set switches from reception to transmission if your voice volume
is appropriate. You can select between 3 sensitivity levels (step 3 =
highest sensitivity).
Activate VOX
1
.
Push the
MENU
key four times:
VOX oF
is flashing.
2. Select the desired sensitivity level by means of the
s
key.
3. Validate by means of the
PTT
key: the
VOX
is displayed.
Deactivate VOX
1. Push the
MENU
key four times: the adjusted sensitivity level is
flashing.
2. Select the
oF
by means of the
t
key.
3. Validate the
oF
by means of the
PTT
key: the
VOX
is no longer
displayed.
Automatic scan
The automatic scan permits to find active channels quickly. It scans
independently all of the 8 channels and stops as soon as a signal
exceeds the squelch threshold. After having found a signal scanning
will stop. It will start anew, if no signal is available. You can also restart
scanning by pushing the
s
or
t
key.
Beside the channel scan function your radio set offers also a CTCSS
scan and a DCS scan.
27
