16
Features
2 channels, 40 MHz
Sensitivity and volume level adjustable
Display of room temperature on baby unit
Clear and easy-to-view display of all important functions
Out of range indicator
Display of battery level
Starting up the transmitter
Power supply
You may use the AC adaptor (6 V/200 mA) or 3 alkaline batteries (type
AAA) to operate the transmitter.
Power supply with AC adaptor
Make sure that the AC adaptor input voltage is the same as the AC
outlet voltage (230 V/50 Hz). Insert the adaptor into the outlet and
connect the plug to the DC IN-jack (8).
Power supply with batteries
Open the cover of the battery compartment (9) on the back of the
housing.
Insert 3 alkaline batteries into the battery compartment. Observe the
polarity markings.
Close the battery compartment.
Turning on/off
Turn the transmitter on/off by pushing the channel selector (4). To turn
on choose either channel A or channel B. The green power LED will
light.
Note
: Always switch the channel selectors of both units to the same
position (both A or both B)!
Sensitivity
Adjust the sensitivity of the microphone with the sensitivity button(3):
Button on the right side (high sensitivity): also gentle noises will be
transmitted
Button on the left side (low sensitivity): only loud noises will be
transmitted.
