10
Functions
Stabila LD 500
D
GB
SLO
F
I
E
P
NL
N
FIN
DK
TR
CZ
PL
S
HR
H
SK
LV
LT
KOR
RUS
CHN
EST
GR
RO
Addition / subtraction
Distance measuring.
The next measurement is added to the previous one.
The next measurement is subtracted from the previous one.
This process can be repeated as required.
Press this button and the result is then always shown in the summary
line with the previous value in the second line.
The last step is cancelled.
Multiplication
Measure distance.
Press this button
once
. The symbol " * " appears in the display.
The keypad switches to numerical entry mode. Enter a dimensionless
number and confirm your entry with
. The value entered is multiplied
by the measurement value.
Division
Measure distance.
Press this button
twice
. The symbol " / " appears in the display.
The keypad switches to numerical entry mode. Enter a dimensionless
number and confirm your entry with
. The value entered is divided by
the measurement value.
Area
Press
once
. The
symbol appears in the display.
Press this button to take the first length measurement
(e.g.
length).
Press it again to take the second length measurement
(e.g.
width).
The result is shown in the summary row.
Press and
hold
the
key to display the perimeter
.
Volume
Press this button
twice
. The
symbol appears in the display.
Press this button to take the first length measurement
(e.g.
length).
Press this button to take the second length measurement
(e.g.
width).
Press this button to take the third length measurement
(e.g.
height).
The result is shown in the summary row.
Press and
hold
the
button to display additional room information
such as ceiling/floor area
,
surface area of the walls
, circumfe-
rence .
Trapezium measurement 1
See drawing {
J
}
Press the
key once. The symbol
is displayed.
Press the
key and take the first length measurement
(e.g.
height 1).
Press the
key again and take the second length measurement
(e.g. width)
Press the
key and take the third length measurement
(e.g.
height 2).
