LAR 350
20
en
To enable the LAR 350 to perform vertical levelling and
marking tasks, it is placed on its side on the feet integrated
into the body. Position the unit so that the wording
‘VERTICAL MODE THIS SIDE UP’ appears on the top. The op-
erator display is then also at the top. The retaining bracket
(12) can be used to mount the LAR 350 on a tripod. The unit
switches into vertical mode automatically. All modes and
functions are available.
Note that in this position only the laser x-axis is automati-
cally levelled. The LEDs of the laser y-axis are lit.
16.1 Vertical Function
Y
Y
Button (24) switches the scan function on/off. Only when
the unit is switched from rotation mode to scan mode is the
scan line always on the floor immediately after switching on.
Now the laser can be simply aligned on the floor. To rotate
the scan line to the desired position, hold down button (23).
--> ‘Scan mode’
16.2 Positioning Aid in Vertical Mode
(24)
(23)
1x
1x
VERTICAL MODE
THIS SIDE UP
