LAR 350
19
en
Briefly pressing button (21) = laser x-axis or (22) = laser y-axis
causes the rapidly flashing LEDs (blue or green) to indicate
the corresponding laser axis. The laser axes can be adjusted
independently through an inclination range of up to ±5°.
By using an inclinometer (available as an accessory),
this angle can be increased to about 50°.
Press the Shift button (17) to enable the inclination function
for the laser axes. The axis inclinations are varied by holding
down button (21) or (22) while rotating the remote control
unit. The corresponding LEDs flash during adjustment.
15. Inclining the Laser Axes
(17)
(22)
(21)
(22)
±5°
Y
Y
X
X
1x
(21)
