manualshive.com logo in svg

STA-RITE IntelliPro Variable Speed, Инструкция по установке и эксплуатации


Поделиться
Скачать
background image

Priming

 

(Continued)

To access the Priming menu:

1.  Check that the green power LED is on and press the 

Menu

 button. “Settings” is displayed.

2. Use the 

Down

 arrow button to scroll to “Priming”

3. Press the 

Select

 button. The factory default is set to priming “Enabled“.  

4.  To disable priming,  press the 

Select

 button.

5. Use the 

Up

 arrow button. “Disabled” is displayed.

6. Press the 

Enter

 button. 

7. Press the 

Down 

arrow button. Screen will read “Max Priming Time”.  Factory default is set 

to 11 minutes.

8. Press the 

Select

 button to change the setting. The cursor will highlight the minutes column.

9. Use the 

Up or Down

 arrow button to change the time from 1 minute to 30 minutes..

10. Press the 

Enter

 button to save the setting.

11. Press the 

Down arrow

 button. The screen will read “Primed Sensitivity”. The default for this 

setting being “1”.

12. Press the 

Select

 button to change the setting. The cursor will highlight the number.

13. Use the

 Up or Down 

arrow button to change the time from 1% to 100%. Increasing the 

number makes the Priming less sensitive.

14. Press 

Enter

 to save.

15. Press the 

Down arrow

 button.  Screen will read “Priming Delay”.  The default for this 

setting is 20 seconds.

16. Press the 

Select

 button to change the Setting.

17. Use the 

Up or Down arrow 

button to change the setting from 1 second to 10 minutes.  

Caution:  Increasing the Priming Delay causes the pump to stay in the priming mode longer.

18. Press the 

Enter 

button to save the setting.  

Note: To cancel a change, press the Escape button instead of the Enter button to exit without 
saving.

19. Press the 

Escape

 button to exit.

Disable Priming Feature on the Pump

When the IntelliPro

®

 pump is connected to an automation control system, the internal priming feature 

cannot be disabled by the external automation control system. If IntelliPro

®

 is connected to an automation 

control system, (IntelliTouch, EasyTouch or SunTouch), the priming features of the automation control 
system are in addition to the internal priming settings of the pump. If priming is enabled on the pump, 
on startup it will prime using its internal logic fi rst before responding to commands from any automation 
control system. If the IntelliPro

®

 pump is connected to an automation control system and priming is not 

desired, it must be disabled both on the pump and within the automation control system. 

18 

 IntelliPro

® 

Variable Speed Pump Installation and User’s Guide

 

Содержание IntelliPro Variable Speed





















































Отзывы:

Нет отзывов

Похожие инструкции для IntelliPro Variable Speed

A.O. Smith 505 Operation & Installation Manual preview
505
Бренд: A.O. Smith Страницы: 40
salmson S series Installation And Operating Instructions Manual preview
S series
Бренд: salmson Страницы: 49
SAER Elettropompe CB Series Use And Maintenance Manual preview
CB Series
Бренд: SAER Elettropompe Страницы: 16
Calpeda VAL Operating Instructions Manual preview
VAL
Бренд: Calpeda Страницы: 32
RainSoft UF Series Owner'S Manual preview
UF Series
Бренд: RainSoft Страницы: 16
Oasis ELITE AC9 Installation And Instruction Manual preview
ELITE AC9
Бренд: Oasis Страницы: 44
Steinberg S-MAX 550 S Operating Instructions Manual preview
S-MAX 550 S
Бренд: Steinberg Страницы: 52
VWR 181-0498 Instruction Manual preview
181-0498
Бренд: VWR Страницы: 40
EMI S2H Specification Sheet preview
S2H
Бренд: EMI Страницы: 5
Bestway Alwayzaire P3062 Owner'S Manual preview
Alwayzaire P3062
Бренд: Bestway Страницы: 2
Bard I-TEC Series Installation Instructions Manual preview
I-TEC Series
Бренд: Bard Страницы: 42
Zodiac Z200 M2 Installation And Use Instructions Manual preview
Z200 M2
Бренд: Zodiac Страницы: 16
Kawamoto Pump RCD-40A0.75 Instruction Manual preview
RCD-40A0.75
Бренд: Kawamoto Pump Страницы: 28
Oase SwimSkim 25 Commissioning preview
SwimSkim 25
Бренд: Oase Страницы: 76
Aqua MAX CF20 series Owner'S Manual And Installation Instructions preview
CF20 series
Бренд: Aqua MAX Страницы: 56
baracuda 0327405 Installation & Operating Instructions Manual preview
0327405
Бренд: baracuda Страницы: 14
A.O. Smith BTH 300 Instruction Manual preview
BTH 300
Бренд: A.O. Smith Страницы: 76
York YHE24B21S Technical Manual preview
YHE24B21S
Бренд: York Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды