4
INSTALL YOUR CALYPSO
Step 1: Install Vacuum Port Door fitting
If there is no spring-loaded door on the vacuum port, in-
stall the included cover.
If your pool only has a skimmer, and no dedicated vac-
uum port, proceed to Step 3.
1. Screw the fitting into the port opening.
2. Orient the fitting so the arrow on the door point up.
3. Secure the cover by tightening the allen-screw below
the door.
Step 2: Install Regulator in Pools with a
Dedicated Vacuum Port
The pool regulator adjusts the amount of vacuum in the
line for optimum cleaning.
If your pool has a dedicated wall fitting in addition to the
skimmer, follow the procedure below.
1. Turn off the pool pump.
2. Place the regulator in the skimmer as shown. The cap
must be placed in the top
Use the adapter cone if needed.
3. Attach one length of hose to the vacuum port
Step 3: Pools with only a Skimmer
1. Turn off the pool pump.
2. Place the regulator in the skimmer as shown. Do not
install the cap.
Use the adapter cone if needed.
3. Submerge one length of hose so it becomes filled
with water.
4. Insert the “male” end of the hose into the regulator.
Figure 3 - Vacuum Port Installation.
Hose
End
Vac Port
Fitting
Figure 5 - Vacuum Port Connection.
Skimmer
Regulator
Cap
To Pump
Adapter Cone
Figure 4 - Regulator in Skimmer.
Skimmer
Regulator
To Pump
Adapter Cone
Figure 6 - Regulator in Skimmer.
