Configuration using the stmcconfig utility
ST Micro Connect 2
30/58
7912386 Rev 12
5.16
ST Micro Connect 2 status reports (--status)
The
--status
option provides status information for the ST Micro Connect 2. The type of
information that can be reported includes: whether the boot was successful, whether the ST
Micro Connect 2 is in use and to which host it is connected.
Syntax
stmcconfig --ip <
ip address
> --status
Example
% stmcconfig --ip 192.168.1.1 --status
5.17
Display version information (--version)
The
--version
option provides the ST Micro Connection Package version information for
stmcconfig
.
Example
% stmcconfig --version
STMC Package Release 2011.2.1
5.18
Visual identification of an ST Micro Connect 2 (--visual)
The
--visual
option allows LEDs on the front panel of an ST Micro Connect 2 to be
flashed, allowing easy visual identification of an ST Micro Connect 2. This is most useful
when development targets are stored together and identifying a specific ST Micro Connect
is difficult. The <
n flashes>
argument to this command is the number of times to flash the
LEDs. The default is 10.
Syntax
stmcconfig --ip <
ip address
> --visual [<
n flashes>
]
Example
% stmcconfig --ip 192.168.1.1 --visual 30
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
