Ethernet connection
ST Micro Connect 2
20/58
7912386 Rev 12
4.4
Connection to Ethernet
Connect the ST Micro Connect 2 to the Ethernet network, using the supplied CAT 5 UTP
Ethernet cable.
4.5
Testing Ethernet configuration
When the ST Micro Connect 2 is configured and connected on the network by Ethernet, it
should be visible on the network.
Section 3.6: Test the connection on page 17
describes
how to test the connection.
4.6
Connection to the target system
Connection to the target development system is described in
Appendix B: Target interface
on page 40
.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
