manualshive.com logo in svg

ST STMC2, Руководство пользователя

Поделиться
Скачать
ST STMC2 Скачать руководство пользователя страница 1

December 2011

7912386 Rev 12

1/58

1

STMC2

ST Micro Connect 2 host-target interface

Features

■

High bandwidth connection to host computer

– Networked 10/100 Mbit Ethernet 

connection

– Local USB 1.1 or 2.0 Type B connection

■

VHDCI LVDS connection to target JTAG 
interface - includes an STMC I/O convertor 
Type A for target boards with a TTL JTAG 
connector, an STMC I/O convertor Type C for 
target boards with an ARM 20-way connector 

or

 an STMC I/O convertor Type H for target 

boards with a MIPI-34 connector

■

Connects to target RS-232 port for data relay

■

Supports STMicroelectronics single and 
multi-core system-on-chip (SoC) devices

■

Provides system startup, program download, 
debug and I/O services.

■

Enables concurrent debug of multiple cores in 
multi-core SoCs

■

Built-in DHCP support

■

LCD and software support package for 
configuration and administration

■

Support for Windows XP, Windows 7 and 
Red Hat Linux hosts

■

ST Micro Connection Package

Description

The ST Micro Connect 2 (STMC2) can be 
connected to a local host or LAN using the 
10/100 Mbit Ethernet connection or to a local PC 
host using the USB 2.0 connection (USB 1.1 
compatible). It connects to a target board’s JTAG 
connector and provides host software with the 
ability to start up the target board, download 
programs and debug them in the target.

For multi-core system-on-chip devices (SoCs) the 
ST Micro Connect 2 can support multiple 
concurrent debuggers, each connecting to a 
different core on the chip.

The target is connected using a VHDCI LVDS 
connection. A Type A, Type C 

or

 Type H I/O 

convertor is included for target boards without an 
on-board LVDS connector (the convertor supplied 
is dependant on order code).

The ST Micro Connection Package provides 
software utilities and firmware, including 
TargetPacks for certain ST evaluation boards. 
Supported hosts are Windows XP, Windows 7 
and Red Hat Linux. The ST Micro Connect 2 is 
compatible with a range of ST cores, SoCs and 
toolsets: ST20, ST40, ST200, STxP70 and 
specific ARM based products (including 
Cortex-A9).

www.st.com

Downloaded from

Arrow.com.

Содержание STMC2



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды