UM0857
Additional setup information
Doc ID 16752 Rev 1
33/66
9.
Press the INC icon using a stylus which increments the ten’s place of the hour from 0 to
1.
Figure 28.
“SYSTEM TIME” - 2
10. In the same way the ten’s place of the hour can be incremented to 2. If it is incremented
again, the digit rolls over and starts from 0 again.
11. After the user has selected the correct digit for the ten’s place of the hour, then he
should move to the next place (one’s place of the hour) by pressing the MOVE icon
using a stylus. The pointer of the time setting moves to the one’s place of the hour and
is highlighted as shown in the figure below.
Figure 29.
“SYSTEM TIME” - 3
12. Pressing the INC icon increases the digit at the one’s place of the hour. When the
required digit is displayed at the one’s place of the hour, then the user can move to the
next place (ten’s place of the minutes) using the MOVE icon, as in the previous step.
13. Similarly, the user can select the total system time using the INC and MOVE icons.
www.BDTIC.com/ST
