Description of the STEVAL-IFS014V1 (smart monitoring station)
UM0857
28/66
Doc ID 16752 Rev 1
Restore default
The user can restore the factory default values by selecting the "RESTORE FACTORY"
option of the menu (see
). For the details of the factory default values see
Note:
This restores only the factory default values of the smart monitoring station (STEVAl-
IFS014V1) and not those of the active nodes (STEVAL-IFS015V1).
4.4
Meaning of navigational icons
There are four different navigational icons displayed on the menu screens where the user
has to enter values for certain settings. The meaning of these icons is as follows:
●
INC: The function of this icon is to change the value where the pointer is currently
placed. In general this increments the digit and upon reaching the maximum limit, the
value rolls over and increments again.
●
MOVE: The function of this icon is to change the current place of the pointer.
Upon pressing this icon the pointer shifts by one place to the right. When the pointer
reaches the last place, upon pressing this icon again, the pointer rolls over to the first
place with the contents remaining unchanged. The user can again update the contents
of the place by using the INC icon.
●
SET: The function of this icon is to set the entered data into the system. If the
data entered is valid, then the data is accepted and if it is not valid, the system
generates an error and exits the menu.
●
BACK: The user can go back to the previous menu without doing any settings
using this icon.
Note:
Throughout the complete system the meaning of these icons is always same and serves the
same purpose regardless of the data to be entered.
www.BDTIC.com/ST
