ST HDS2 Series, Руководство пользователя

Страница: 7 / 67

ST7MDTU3-EMU2B Emulator User Manual 1 - Introduction
7/63
Chapter 3: STVD7 on page 17, explains how to install ST7 Visual Debug on
your PC, and set up the emulator configuration so that you can begin your
debugging session.
Once assembled and linked, the application software is ready to be downloaded
into the ST7 emulator. The development station performs a real-time emulation
of the target device, thus allowing high performance testing and debugging of
both application hardware and software.
When the program is fully debugged, the ST7 EPROM programming board
(ref.: ST7MDTU3B-EPB — not provided with this emulator kit) can be used to
program the emulation device with the Motorola S Record format file produced
by the OBSEND formatter.
1.3 Software and Documentation for the Emulator Kit
The “MCU on CD” CD-ROM contains:
• ST7 Tools, comprising the following software:
- The source-level graphic debugger, ST7 Visual Debug, that operates
with ST7 HDS2 Emulators and ST7 Development Kits or as a
standalone ST7 simulator.
- The ST7 Assembly chain, composed of an assembler, linker, librarian
and formatter.
- The ST7 Windows Epromer to program your MCU target devices.
• Third-party C compiler and toolchain demos (Hiware and Cosmic).
• ST7 application notes (with sources), training slides and exercises, this
manual (in PDF version), and other useful reference materials.
• Datasheets for the ST7 MCU family.
1.4 About this manual....
Detailed instructions on how to install your emulator configuration is described
in Chapter 2: Getting Started on page 9.
How to start debugging your application using your emulator and ST7 Visual
Debug is described in
Chapter 3: STVD7
on page 17.
The emulator kit’s hardware features are described in
Chapter 4: Emulator
Features on page 43.