ST HDS2 Series, Руководство пользователя

Страница: 13 / 67

ST7MDTU3-EMU2B Emulator User Manual 2 - Getting Started
13/63
EMC-Compliant Probes: In order to work under an EMC-compliant environment,
you will have to clip two or three EMC-ferrites on the 50-wire flat cables linking the
probe to the emulator box. Place these ferrites as close to the emulator window as
possible. Three ferrites are provided in the package. See Figure 6 for an illustration
of where to attach the ferrites.
Step 3: Connecting the Probe to your Application Board
Emulated devices of the ST7MDTU3 family are available in two packages.
Each package has its own connection procedure, found on the page cited in the
table below:
Note:
You can use your emulator kit with ST7 Visual Debug without an application board—however
the emulation probes must be connected to the HDS2 emulator.
Figure 6: Making your Probes EMC-Compliant
Packages Page No.
SO34 14
SDIP32 15
ST7 HDS2
Emulator
Side View
Ferrites
Flat Cables
Side View
Probe +
Application Board