ST HDS2 Series, Руководство пользователя

Страница: 50 / 67

4 - Emulator Features ST7MDTU3-EMU2B Emulator User Manual
50/63
4.6 Front Panel LEDs
Four LEDs on the front panel of the HDS2 box indicate the state of the
development tool during emulation:
• Power (Green)—indicates that the 5 V power supply is ON.
• Run (Yellow)—indicates that the ST7 is running (not in RESET, WFI and HALT
mode).
• System (Red)—not used with this emulator.
• Reset (Red)—not used with this emulator.
4.7 On-Chip Peripherals
You can configure certain on-chip peripherals in ST7 Visual Debug’s MCU
Configuration dialog box (refer to Section 3.6: Creating a workspace on page 24)
so that the emulator accurately emulates your target device.
The on-chip peripheral options supported by the emulator are described in the
following sections.
Triggers
Analyser
Probe
ST7 HDS2 Emulator
System (unused)
Reset (unused)
Run
Power