www.ssz-gmbh.de [email protected] Thüringerstrasse 17, 46286 Dorsten
15
STORAGE AND TRANSPORT
UTILISATION
NOTES
SSZ-RZ4 and SSZ-RZ4B control units shall be stored and trans-
ported in their original, manufacturer’s packaging, protecting
them from damage. The units are individually packed in carton
boxes, together with operating manuals.
The devices, manufactured by the SSZ GmbH Company, are pro-
fessional electronic solutions, designed exclusively for industrial
applications (so called, B2B devices). Unlike the commonly used
household utilities (B2C), B2B devices must not be disposed to-
The units shall be stored at indoor, dry premises, the relative
humidity of which shall not exceed 80%. The ambient air temper-
ature shall not exceed the range from -10°C to 50°C. Protection
grade of control unit enclosure against external factors: IP 30
gether with municipal waste. When the service life of a B2B device
expires, it can be returned to the SSZ GmbH for proper utilisation.
Safety units are only a part of safety system
- design and construction of a safety system
shall be based on the rules and provisions,
contained in standards and in the machine
directive.
Before any unsafe machine task, the safety
system functionality shall be checked. The
functionality check involves ssz safety unit
activation and confirmation that a dangerous
machine run has been stopped.
Regardless of the circumstances, the
occupational safety rules, as well as other
appropriate regulations shall be adhered to.
Failure to do so may pose hazards for health
and life.
If a defect/failure occurs, such a unit shall be
returned to the manufacturer for repair.
All electric connections shall properly be
tightened and checked. Periodical checks of
electric terminals shall be scheduled.
SSZ-units shall be mounted exclusively in
electric cabinets. The required protection
degree shall be observed.
Opening the SSZ– control unit box may lead
to the loss of the system safety. Under no
circumstances shall the devices be opened.
Any hologram breach shall make the
guarantee void.
All external cable feeds shall be protected
against excessive loads and led in insulating
sleeves.
Rated load values on outer contacts shall not
be exceeded.
