User Manual
Universal Serial/PROFIBUS DP Gateway
GT200-DP-RS
WWW.SSTCOMM.COM
30
Size of PROFIBUS DP Input buffer:
Set in PROFIBUS DP master configuration software, cannot be modified.
Size of PROFIBUS DP Input buffer:
Set in PROFIBUS DP master configuration software, cannot be modified.
How to action after N successive response timeout:
Clear data or Hold data can be selected.
Successive response timeout for N times:
2 to 254 can be selected.
PROFIBUS address
: Use the hardware to set the address or PROFIBUS address can be selected.
Compatibility mode:
Open or Close can be selected.
6.4.2 Interface of Subnet Configuration View
1. Choose Modbus Master in protocol type
Configurable parameters are shown as follows:
Baud Rate, Data Bits, Check Bit, Stop bit, Transmission mode, Response timeout, Delay between Polls, Output
Mode, Scan Rate, Status of Modbus Command Response, Communication interface, Time Interval between
Character(Sending) and Time Interval between Character(Receiving).
Interface of configuration view is shown as below:
