SST Automation GS11-MT, Руководство пользователя

Страница: 57 / 58

www.sstcomm.com
57
Note
: RX is the data received, TX is the data transmitted.
SST Automation-defined protocol work mode:
Data transmitting: After establishing the connection successfully, you can click “Transmit” to transmit data
written in the data transmitting section. The format must be correct, and there is a space in each two bytes (HEX),
and the data length must be the same with “Input data bytes”.
Data receiving: After establishing the connection successfully, you will receive the data transmitted from the
module, and display the data in the data receiving section.
Cyclical: If you want to transmit data cyclically, you need to check “Cyclical”, and click “Transmit” button;
if you want to stop transmitting data cyclically, you only need to uncheck “Cyclical”.
Note : The format of the data transmitted must be correct, or you can not transmit them.