English
Accepting door calls
The ringing tones for the
front door and apartment
door are different. When a
visitor presses the door bell,
the telephone rings and the
mute button flashes.
The call can be accepted
within 60 seconds of the
last ring tone.
Actuating the door
release
When you press the door
release, the door from
which the last call came is
opened for 3 seconds.
Switching on the
light
When you press the light
button, the lighting is
switched on, provided this
has been connected by your
electrical installer.
Muting the bell
When the mute button
is pressed briefly, all the
ringing tones are switched
off or on again. The
button lights up red to
indicate that the mute has
been activated. If a visitor
rings the door bell while
the in-house telephone
is switched to mute, the
button flashes.
Brightness and
colour
Brightness and colour can
be adjusted using the two
rotary controllers.
Key assignment
The function of the
buttons depends on how
the telephone has been
configured. For further
information, please contact
your electrical installer.
Setting the call tone
volume
The call tone volume can be
set in five steps:
Put down
the receiver then press
and hold down the door
release and muting
button for 3 seconds to
hear the set ring tone
volume.
Hold down the
door release button, briefly
press the muting button to
increase the volume by one
increment. After the volume
has reached the highest
level, it will return to the
lowest level again.
The LED under the muting
button flashes during
the setting process. After
releasing the door release
button, the last set value
remains saved.
+
+
4
4
