SSR Motorsports SRU600, Руководство пользователя

Страница: 80 / 123

1. Differential gear oil drain bolt
4. Install the differential gear oil drain bolt, and tighten
it to the specified torque.
Tightening torque:
Differential gear oil drain bolt:
9.8 Nm (0.98m.kgf, 7.1ft.lbf)
5. Fill the differential gear case with the
recommended oil.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.32 L (0.28 Imp qt, 0.34 US qt)
CAUTION:
Be sure no foreign material enters the differential gear
case.
6. Install the differential gear oil filler bolt, and then
tighten it to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3m.kgf, 17ft.lbf)
7. Check for oil leakage. If oil leakage is found, check
for the cause.
Coolant
The coolant level should be checked before each ride.
Checking the coolant level
1. Place the vehicle on a level surface.
2. Open the hood. (See pages 8-6?-7 for hood
opening and closing procedures.)
3. Check the coolant level in the coolant reservoir
when the engine is cold as the coolant level varies
with engine temperature.
NOTE:
The coolant should be between the minimum and
maximum level marks.