SSR Motorsports SRU600, Руководство пользователя

Страница: 57 / 123

LEARNING TO OPERATE YOUR VEHICLE
You should become familiar with the performance
characteristics of the vehicle in a large, flat area that is
free of obstacles and other vehicles. Practice control of
the accelerator pedal, brakes, steering, and drive
select lever. Drive first at slow speed and become
comfortable at that speed before gradually increasing
your speed. Become familiar with the way the vehicle
feels in low and high ranges, first in two-wheel drive
(2WD) and then in four-wheel drive (4WD) and
four-wheel drive with the differential locked (DIFF.
LOCK). Also practice driving in reverse. Take the time
to learn basic operation before attempting more difficult
maneuvers.
Perform the Pre-Operation Checks on pages 5-1-11.
Set the parking brake, shift to neutral, and follow the
instructions on page 6-1 to start the engine. Once it has
warmed up and you have turned the choke off, you are
ready to begin driving your vehicle. With the engine
idling, shift the drive select lever into low or high. Then
release the parking brake. Press the accelerator pedal
slowly and smoothly.
The centrifugal clutch will engage and you will start to
accelerate. Avoid higher speeds until you are
thoroughly familiar with the operation of your vehicle.
When slowing down or stopping, take your foot off the
accelerator pedal and smoothly press the brake pedal.
Improper use of the brakes can cause the tires to lose
traction, reducing control and increasing the possibility
of an accident.
CAUTION:
Do not shift from low to high or vice versa without
coming to a complete stop and waiting for the engine
to return to normal idle speed. Damage to the engine
or drive train may occur.