SSR Motorsports SR250S, Руководство пользователя

Страница: 23 / 39

23
Intake
Intake
Intake Intake side
side
side side
：
Put the feeler gague between the rocker arm stud and valve, measure the
intake side valve clearance
Intake Intake Intake Intake valve valve valve valve clearance clearance clearance clearance :::: 0.03mm 0.03mm 0.03mm 0.03mm
（
Figure 13-3
）
Exhaust Exhaust Exhaust Exhaust valve valve valve valve side side side side
：
Put the feeler gague between the rocker arm stud and valve,measure the
exhaust side valve clearance
Exhaust Exhaust Exhaust Exhaust valve valve valve valve clearance clearance clearance clearance
：
0.05mm 0.05mm 0.05mm 0.05mm
（
Figure13-4
）
Rotating the crankshaft a few times on the clockwise direction,make the crankshaft to piston compression top dead
center,check the valve clearance .
Put the O-Ring on the crankshaft timing screw with oil( check the O-Ring,if necessary with a new O-Ring replacement),
Put the grease on Crankshaft hole cap thread .
Install the crankshaft hole cap and screw it to the special torque.
Torque Torque Torque Torque
：
15N.m 15N.m 15N.m 15N.m
Figure13-3
Figure 13-4