24
EN
1 . Information about this document
1 .1 Function
This operating manual provides all necessary information for the assembly, installation, safe
operation and disassembly of the locking device with process lock. The operating manual
must always be readable and available during the operating life of the device. Read the
operating manual carefully before using the device. Always hand this operating manual over
to future owners and users of the device. Add any supplement received from the manufacturer
to the operating manual.
1 .2 Safety instruction for the authorized skilled personnel .
The tasks described in this operating manual may only be carried out by trained skilled per-
sonnel authorized by the plant owner. You must read and understand the operating manual
before starting the HOLDX RL2 process lock with safety function. Familiarize yourself with
the applicable rules and regulations relating to industrial safety and accident prevention. The
national legislation applies to the assembly, installation and regular technical inspections.
1 .3 Symbols
Caution
If the warnings are not observed, faults or malfunctions as well as injury to
persons and/or damage of the machines can occur.
Information
Helpful additional information
1 .4 Scope of application
The product described herein has been developed to be a part of an overall system or machine
for safety-related application in process and automation technology. The manufacturer of
the plant or machine is responsible for ensuring the correct overall function of the system.
The process lock with safety function may only be used in accordance with the following
versions or for applications approved by the manufacturer. For detailed information on the
application area: see Section 2 – Product description.
1 .5 Safety Instructions
Observe the safety instructions in the operating manual, which are identified by above
symbol for caution or warning. Follow national installation, safety and accident prevention
regulations. For additional technical information refer to SSP data sheets or visit our website
at www.safety-products.de.
We reserve the right to make technical modifications for reasons of improvement.
1 .6 Foreseeable Misuse
Danger to persons or damages to parts of machines or installations can arise as a result
of inappropriate or incorrect use or manipulation of the process lock. Please observe the
related information in the standard EN ISO 14119.
It is prohibited to use with HOLDX RL2 spare parts or accessories, which have not been
expressly approved by the manufacturer.
1 .7 Liability Disclaimer
We accept no liability for damages or operational malfunctions resulting from improper
installation or failure to comply with this operating manual. No other liability is accepted
by the manufacturer for damages resulting from use of spare parts or accessories, which
have not been approved by the manufacturer. Any unauthorized repairs, reconstructions and
modifications are not permitted for safety reasons and rule out liability of the manufacturer
for resulting damages.
2 . Product Description
2 .1 Intended use
The device can only be used in industrial applications. In conjunction with a movable guard
and the machine control, this safety component prevents dangerous machine functions from
being carried out as long as the guard is open. If the protective device is opened during
machine operation, a stop command is triggered.
Important
Position of the safety switch
Since the safety switch is not intended for process lock with personal protec-
tion, the protective device monitored by the safety switch must be positioned
in such a way that the access time corresponds at least to the stopping time
of the machine.
2 .2 Design types
This operating manual is valid for the following design types:
Type code
Master - HOLDX R
2-CS-P
-
-
Slave - HOLDX R
2-CC-
Design
L
long design
EDM+Reset
8
without EDM
12
with EDM and manual reset input
Coding variant
S
standard coding
I
individual coding
W
individual, reteachable coding
Extended interfaces
B
Bluetooth
Anchor plate with RFID tag
HOLDX RL-A1
fixed latching force (with 50 N permanent magnet)
HOLDX RL-A2
without fixed latching force (without permanent magnet)
2 .3 Special design types
For special design types, that are not listed in the type code in Section 2.2, the above and
following information is accordingly applicable if they correspond to the standard design.
