①OLED Display: Shows resistivity, Temperature, Humidity, Battery level, Charged Voltage.
②Test Jacks: The Shielded black test cable's male connector connects into the meter's female
connector, and the red test cable's banana plug connects into the meter's banana jack.
③Exponent LEDs: These LEDs indicate the surface resistance exponent value. They are colot
coded for resistance decade quick checks.
Exponent level
<3, 3
: Yellow
4, 5, 6, 7, 8, 9, 10
: Green
11, 12, >12
: Red
I.e. 8 = 108 ohms or 100,000,000ohms
④Power Switch: Slide the switch to the left to power the meter OFF. Slide the switch to the right
to the power the meter ON.
⑤Black pushbuttons: Each black pushbutton corresponds to the
prompts on the bottom-left and bottm-right of the display.
These buttons are used to access the Settings and Memory
Recall menus and scroll p and down between menu options.
⑥Red pushbutton: Corresponds to the prompts located in the
bottom-center of the display. This button is used to perform
tests and select menu options. Press and hld this button when
in the Setin s and Memory Recall munus to exit and return to
the hom screen.
⑦Battery case
Use AA Alkaline battery (4pcs).
3
Confirm that the following items are included with the device before using it for the first time.
■
Instruction manual/warranty x 1 (this document)
Items included with product and the name of each part
①
②
③
④
⑤
⑤
⑥
⑦
Side View
Back side View
