Copyright By SRC
Design and Specification are subjected to change
Page 6
Secure the threads as shown, but not
tighten it fully.
Bracket “C” in “As is mounted
condition”, is shown below.
Step 4:
Mounting of Bracket “D” (5)
Orient the Bracket “D” to the Mounting hole
(as shown in Red) and use the M10 bolt
(Already available in the Vehicle) and slip-in
the bolt in-line with the Mounting hole, as
shown.
Do not fully tighten the Bolt to the
Mounting hole threads.
Drawing view to the left shows the Right
hand Side brackets “C” and “D” in “As is
Mounted Condition”.
