Copyright By SRC
Design and Specification are subjected to change
Page 3
Mounting Instructions
Step 1:
Mounting of Bracket “A” (2) (On the Right
hand side)
Unscrew the M10 Bolt (OE Part) from the
hole (Shown in Red colour in the drawing
below)
(which connects the Tubular frame to the
Engine housing) and Slip-in the Bush (6)
and Orient the Bracket “A” (2) in-line to
this mounting hole.
The drawing to the right shows the Tubular frame,
Mounting hole and the train of parts which has to be
used for Mounting the Bracket ‘’A”.
Secure the threads as shown, but not
tighten it fully.
Bracket “A” in “As is mounted
condition”, is shown below.
