Model SR463
i
R-H, SR463
i
R-3H, SR463
i
R-4H Series In-Floor Platform Scale
Operating and Service Manual
Part No. MAN463
i
R-H_201118
Page 13 of 20
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
BUTTON FUNCTIONS
WEIGH
Press and hold to zero scale. Button is used to zero the system before placing the patient
on the scale. Ensure that nothing is in contact with the weighing surface during this
procedure.
SEND (PRINTER)
Press to send stored values to printer. Output values include time, date, and weight. If
BMI was calculated, BMI and height will be included in the output values. Also, low
paper and low batteries are output values.
Button is non-operational on this model.
RECALL
Press to recall the last stored weight. The stored weight will be erased when the scale is
zero or another stable weight is stored.
BMI
Press to calculate BMI. When the “
BMI
” is pressed, the default value “
HT
= 65 in
” or
“
HT = 165 cm
” is displayed. If there is no stored stable weight, the display will indicate
“
NO WEIGHT DATA
” and then go back to the weigh screen “
WT = 0.0 Lb
”.
MENU
Press Menu to toggle through the menu options.
UNITS
: Use
UP
or
DOWN
arrow buttons to select “
Lb/ in
” or “
Kg/ cm
”. Press
ENTER
to save changes.
ON TIME
: Use
UP
or
DOWN
arrow buttons to adjust the “
ON TIME
”. The “
ON
TIME
” may be set from 30 to 300 seconds in 30 second increments. Press
ENTER
to
save changes.
gLOCAL
: Non-adjustable. Set at factory.
TIME
and
DATE
: Use the
UP
arrow button to select digit. To change digit use the
DOWN
arrow button. Press
ENTER
to save changes.
NOTE
: When selected, the year position defaults to “00”
Figure 10: Button Display
Continued next page
