Model SR463
i
R-H, SR463
i
R-3H, SR463
i
R-4H Series In-Floor Platform Scale
Operating and Service Manual
Part No. MAN463
i
R-H_201118
Page 11 of 20
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
CLEANING and DISINFECTING
CLEANING
To clean the display / user interface and other scale contact areas:
Use a soft cloth dampened with water and mild detergent to clean scale surfaces.
Wipe surface with clean soft cloth dampened with water and then dry with clean soft cloth.
Do not use abrasive materials to clean scale surface to prevent damage to the surface
finish.
Do not spray liquid directly onto scale surfaces. Use only a damp cloth.
DISINFECTION
To disinfect the display / user interface and other scale contact areas:
Use a soft cloth dampened with disinfectant or a damp disposable disinfectant cloth. Cloth
cannot be dripping wet. Follow manufacturer’s instruction on the proper use of
commercially available disinfectants.
Disinfectant solutions with 1% sodium hypochlorite or 70% isopropyl alcohol are suitable
for display / user interface and other scale contact surfaces.
After disinfecting, use a soft cloth dampened with clean water and dry with a soft clean
cloth to prevent buildup of material on scale finish.
Do not use abrasive material to disinfect / clean scale surfaces to prevent damage to the
surface finish.
Do not spray liquid directly onto scale surfaces. Use only a damp cloth.
WARNING:
DO NOT SPRAY CLEANING SOLUTION OR LIQUIDS DIRECTLY
ON SURFACES TO BE CLEANED
WARNING: EXPOSURE TO EXCESSIVE LIQUID WILL DAMAGE USER
INTERFACE KEYPAD
WARNING:
DO NOT
USE PRESSURIZED WATER OR STEAM. THE SCALE
SYSTEM CONTAINS ELECTRONIC COMPONENTS THAT MAY BE
ADVERSELY AFFECTED BY EXPOSURE TO SUCH AN
ENVIRONMENT.
CAUTION
DO NOT ALLOW THE PIT TO
FILL WITH WATER
