Model SR725
i
Wheelchair Scale
Operating and Service Manual
Part No. MAN725
i
_MICROBAN_200603
Page 5 of 24
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
Copyright 2020
S
Instruments, Inc.
ASSEMBLY
STEP 1:
Unpack the scale and check parts against the
PACKING CHECKLIST.
If there are any
missing or damaged parts, please call the Service Hotline at: 1-800-654-6360.
STEP 2:
Verify that the serial number on the Display Unit (1) matches that on the Base Assembly (3).
Figure 1: Scale System Diagram
Figure 2: Parts Identification List
STEP 3
: (Figure 1) Lay the scale on the floor with the feet on the floor.
STEP 4
: Adjust leveling feet, located in each of the four corners of the underside of the Base
Assembly, to ensure that the scale will sit level on the floor.
Note
: Leveling feet must be in place
to operate the scale properly.
STEP 5
: Pull up the Snap Lock (4) to unlock the mast. Pull the mast up and away from the scale
until the mast is perpendicular to the platform. Mast should lock into place when perpendicular.
#
PART NAME
1
Display Unit
2
Mast
3
Base Assembly
4
Mast Snap Lock
5
Battery Compartment Cover
6
Ramp
7
Transport Wheels
8
Printer Mounting Collar
(optional)
9
Printer Cable (optional)
10
Printer (optional)
1
3
2
4
6
9
8
10
7
1
5
1
10
5
Continued next page