Model SR585
i
Bariatric Stand-On Scale
Operating and Service Manual
Part No. MAN585
i
-KG_MICROBAN_201006
Page 6 of 22
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
ASSEMBLY (Cont’d)
INSTALLING AC POWER SUPPLY (SR585i-KG-AC):
STEP 13:
Connect AC Power Supply (#13) to the bottom side of the Display Unit and plug into
standard AC Wall outlet.
STEP 14:
Press and hold
“ZERO/WEIGH”
button to set System Zero (see directions for
SETTING SYSTEM ZERO
).
INSTALLING OPTIONAL PRINTER
STEP 1:
Mount the Printer Mast Bracket (#9) to the rear of the Mast Assembly (#1) using the two
(2) mounting screws provided.
NOTE:
The three holes on the Printer Mast Bracket should be
towards the top of the Mast Assembly (figure 4).
STEP 2:
Apply a small amount of Loctite
to the three (3) small screws provided and attach the
Printer Mounting Bracket (#8) to the Printer Mast Bracket (#9) (figure 5).
STEP 3:
(Figure 3)
attach the Printer (#7) to the Printer Mounting Bracket (#8) by inserting the
tabs on the Printer Mounting Bracket (figure 5) into the slots on the back of the Printer and
carefully snap in place.
STEP 4:
(Figure 3) Plug the Printer Cable (#10) into the Printer and into the connector on the
bottom of the Display Unit (#5). Tighten the Printer Cable connector screws into the Display Unit
connector.
Figure 4: Printer Mast Bracket
Figure 5: Printer Mounting Bracket
