Spyder XTRA, Руководство пользователя

Страница: 10 / 36

CO2 / COMPRESSED AIR TANK WARNINGS
The CO2 or Compressed Air Tank can fly off with enough force to cause serious
injury or death if the Valve unscrews from the cylinder head. LOOK at the Valve
when removing the cylinder from the marker. Be sure that the valve is turning
with the cylinder rather than remaining stationary with the marker. STOP if the
Valve starts to unscrew from the cylinder. If in doubt, screw the cylinder back
onto the marker and contact a trained person for repair.
7
CO2 / COMPRESSED AIR TANK WARNINGS
• All valves must only be installed or removed by a qualified airsmith.
• See CO2 / Compressed Air tank labels for retest dates. Cylinder tanks must be retested
periodically.
• Improper use, filling, storage or disposal of all air cylinders may result in death, personal injury
and/or property damage.
• Always keep cylinders out of reach from children or any inexperienced person(s).
• Only properly trained personnel in accordance with CGA Pamphlets P.1 and G-6.3 must fill all air
cylinders. Pamphlets are available from the Compressed Gas Association or www.CGANET.com.
• Never alter the cylinder in any way.
• DO NOT expose pressurized cylinders to temperatures in excess of 130˚F (54˚C).
• Cylinders heated to an excess of 250˚F (121˚C) must be condemned or requalified in accordance
with test defined in CFR-49.
• The valve should NEVER be detached from the canister. Please seek immediate assistance from a
trained airsmith should this occur.
• Any tank packed with the product is intended for paintball use only.
• Confirm that there is an attached urethane O-ring on the CO2 / Compressed Air tank valve before
attaching the tank to the marker. The tank will leak air as soon as it is secured to the marker, if the
O-ring is missing from the valve.
• A urethane O-ring is highly recommended before attaching any air supply to the marker.
• NEVER over pressurize a CO2 / Compressed Air cylinder.
• Avoid any direct skin exposure to the escaping gas, when installing or removing any air supply.
• Never expose cylinders to corrosive materials or clean with any caustic cleaners.
INSTALLING A CO2 / COMPRESSED AIR TANK
Firmly screw the CO2 / Compressed Air Tank clockwise into the markers C/A Adapter. HELPFUL TIP: Before installing
a CO2 / Compressed Air Tank, make sure that the tank is full and that it has a urethane bottle on the top of the valve to
prevent air leaks.
IMPORTANT: You should never need to use any hand tool to attach a CO2 / Compressed Air Tank to the C/A Adapter.
SAFE
DANGER
WARNING:UNSAFE