Force humidity outlet on. System information display. Wi-Fi information.
Setup Procedure
Note: The Enter button is used to select options while the Plus and Minus buttons are used to alter
the options or navigate the menu. Some menus use the Enter button to advance to the next option.
While in the menu all power to the outputs are turned off for safety.
Press and hold the Enter button (three beep sequence) to display the initial menu screen. This main
screen allows you to quickly enable the Access Point mode, select which output to configure, enter
the system setup, adjust the safety options, enter the Wi-Fi configuration, use the troubleshooting
tools, and check for a system update (if Wi-Fi is enabled). Each output has its own individual
settings. All settings in the unit are stored in memory which is retained during a power outage.
Note: The fastest and easiest way to setup your new Herpstat is by using the Access Point and your
phone/tablet. Please see the quick start guide at the beginning of the manual for more info.
Navigate to the System Setup option and press Enter.
System Setup
