SPXFLOW Universal 5000 Industrial Series, Инструкция по эксплуатации

Страница: 38 / 58

36
95-03012
1 7 12 5 2 3
*Bushings are shipped loose. Orient them with body dowel
pins. Be sure VALVE mechanism is on DISCHARGE SIDE of
pump.
ADJUSTING SCREW
(ITEM 2) ON DISCHARGE
SIDE.
P
11
6
8
4
9-10
020 002 001 050 002 001 200 022 001 300 022 001
020 020 001 050 002 001 200 002 001 300 020 004
000 060 002 000 060 001 000 060 001 000 060 001
020 071 000 050 071 000 200 071 000 300 071 000
020 073 000 050 073 000 200 073 000 300 073 000
36-92
36-99 36-99 36-99
000 076 003 000 076 002 000 076 005 000 076 006
30-283
- - -
- 30-349 - -
- - 30-349 30-349
N7 0222 N70 041 N70 232 N70 235
020 116 002 050 116 002 - -
020 116 003 050 116 003 - -
N70 034 N70 227 N70 045 N70 157
020 176 000 050 176 000 200 176 000 200 176 000
ITEM QTY DESCRIPTION 5040 5050/5060 5070 5080
Cover Assembly
1 1 Cover 316 SS
2 1 Socket Head Cap Screw
3 1 Adapter
4 1 Piston
5 1 Hex Jam Nut
6 1 Spring, Relief Valve
7 2 Hex Head Capscrew
4
6
8 1 O-Ring Buna - N
9 *
1 Bushing SST
1 0 * 1 Bushing SST
1 1 1 O- Ring Buna - N
1 2 1 Spring, Retainer Steel
PARTS LIST
2. Turn on pump.
a) Close discharge valve slowly and observe
gauge. Do NOT ALLOW PRESSURE to
exceed 200 PSI.
b) Turn adjusting screw clockwise.Observe
gauge. When desired relief pressure is observed,
lock adjusting screw with locknut.
c) Open discharge valve. Relief valve is set
and will open if system pressure exceeds preset
limit.
Without pressure gauge in discharge Line.
1. Turn adjusting screw clockwise and observe
product flow at discharge of system.
2. When product flow reaches maximum or desired
flow rate, lock adjusting screw with locknut.
Adjustable spring tension operated piston opposite
the pumped fluid. The pump cover is reversible for
right or left hand flow direction. O-ring seals are fur-
nished in materials compatible with the product be-
ing pumped.
INSTALLATION
Valve Mechanism MUST BE ON DISCHARGE
SIDE.
ADJUSTMENT:
With pressure gauge and valve in discharge
line.
1. Turn adjusting screw counterclockwise until loss
of spring pressure is felt. then turn clockwise until
light spring pressure is resumed.
FOR INDUSTRIAL STAINLESS STEEL("I")AND DUCTILE IRON ("Dl") PUMP
MODELS 5040, 5050, 5060, 5070, and 5080
WAUKESHA INTERNAL BY-PASS RELIEF VALVE
SECTION XI