3
95-03010
SAFETY
Warnings, cautions and notes are contained in this manual. To avoid serious injury and/or
possible damage to equipment, pay attention to these messages.
LEVELS OF HAZARDS
WARNING
Hazards or unsafe practices which COULD result
in severe personal injury or death and how to avoid it.
CAUTION
Hazards or unsafe practices which COULD result
in minor personal injury or product or property damage.
NOTE
Important information pertaining directly to the subject.
(Information to be aware of when completing the task.
)
WARNING
TO AVOID SERIOUS INJURY, DO NOT
INSTALL OR SERVICE REDUCER UNLESS
ALL POWER IS OFF AND LOCKED OUT.
WARNING
To avoid electrocution, ALL electrical should
be done by a registered Electrician, following
Industry Safety Standards.
All power must be OFF and LOCKED OUT
during installation.
CAUTION
CHANGING GEAR RATIOS MAY
AFFECT YOUR PUMP
PERFORMANCE AND MOTOR
REQUIREMENTS.
CAUTION
To prevent over hung load damage to the
pinion shaft bearing, the motor must be
supported by a chain hoist or jack until the
motor is seated and bolted to the rear case
C flange.
WARNING
All necessary precautions should be
taken prior to working on an
in-service pump.
1. Shut off and close all product to
pump lines.
2. Shut off pump power and lock out
at the control box to avoid any
unexpected start-up.
3. Remove pump drive system
Read and understand this manual prior to install-
ing, operating or maintaining this reducer.
Effective Date of this Manual:
8-13-1997
Triplex Sales
1-847-839-8442
www.triplexsales.com