21
95-03010
3. Press pinion bearing onto shaft and install
external retaining ring. (Figure 29)
NOTE
To avoid damage to the bearing, press against
the INNER RACE.
MAINTENANCE
Figure 31
Figure 32
Figure 30
SPACER
REAR CASE
PINION SHAFT
AND BEARING
Figure 29
PINION SHAFT
RETAINING
RING
BEARING
4. Lubricate pinion bearing with Micro Plate
140 gear oil.
5. Press and seat bearing and pinion shaft
assembly into pinion bearing bore. (Figure 30)
NOTE: To avoid damage to the bearing, press
against the OUTER RACE.
6. Install pinion shaft spacer into pinion bear-
ing bore of rear case.
O-RING
SEAL
LIP FACES IN
SEAL RETAINER
7. Press and seat seal into seal retainer as
shown with lip facing. (Figure 31)
8. Install O-ring onto seal retainer. (Figure 31)
9. Lubricate oil seal and O-ring with Micro Plate
140 gear oil.
10. Align four counter-bored screw holes in
seal retainer with four tapped holes in seal re-
tainer bore. Install seal retainer with four
10-32 x 1/2 socket-head cap screws. Torque
screws to 5 ft. Ibs. (Figure 32)
See page 12 for
INSTALLING REAR CASE
to FRONT CASE.
See page 13 for
INSTALLING MOTOR
SPEED REDUCER ASSEMBLY
Triplex Sales
1-847-839-8442
www.triplexsales.com
