Tools & Setup
RD1100 Operation Manual
26
© Radiodetection 2016
keypad) or revert back to the previous value (by pressing ‘
8
’ on the keypad). If the new value is
significantly out of range, the test will fail.
The odometer calibration value is stored in the Display Unit. If the Display Unit is changed, or
swapped out, you will need to run the Odometer Calibration test again.
Figure 6-14: Results of Odometer Test
GPS
The GPS test will ensure that the system is communicating properly with the GPS and receiving
data. Pressing
GPS
will show the screen in Figure 6-15.
Figure 6-15: GPS Test
