14
field repair
Figure 11
Pinion Cage Assembly
8
6
5
4
3
1
2
7
Figure 12
Interstage Assembly
10
5
2
1
5
Interstage Assembly
Part numbers and references—refer to
Figures 3, 4 and 12.
1. Install thin spiral bevel ring gear spacer (109) against top
of helical pinion. Install key (106) and spiral bevel ring gear
(101) on interstage shaft.
2. Press top cone of bottom interstage bearing (411) onto
interstage shaft.
3. Install double cup and spacer of bottom interstage bearing
(411).
4. Press bottom cone (411) into place.
5. Install retainer disc (203) with bolts. Tighten to 55 ft·lbƒ (75
N·m) torque.
6. Install thick spacer (108) on interstage shaft on top of spiral
bevel gear hub.
7. Press lower cup of upper interstage bearing into
retainer (5).
8. Lower retainer (5) over interstage shaft.
9. Press upper bearing cones (412) onto shaft.
10. Press upper cup (412) and spacer into retainer (5).
11. Install disc (202) with place bolts. Tighten to 150 ft·lbƒ
(204 N·m) torque.
6B
3
4
8
7
9
11
6
