
flexitrax™ flexiprobe™ Operation Manual
2 Quick Start
29
3. Connect the drum to the controller using the link cable (item 4 in
.
4. Connect the drum to the down-hole equipment relevant to the survey required.
5. Turn the power switch on the PSU and press the power button on the controller to turn the system on.
The controller takes around 10 seconds to display the splash screen.
6. Important! The controller displays the Equipment settings menu. If the Equipment settings menu is
showing the equipment currently attached to the controller, then press
Select
. Otherwise, change the
equipment as necessary, highlight Continue, then press
Select
. For full details about these steps, see
section 6.2
7. Deploy the crawler and camera into the pipe as required.
8. Zero the camera distance, as required, using the
0.00
button.
For details, see
9. Create a survey and start recording your survey video.
For details, see
section 6.13
Содержание CUES flexiprobe
Страница 47: ...flexitrax flexiprobe Operation Manual 3 System overview www cuesinc com 47 3 4 3 Manual drum and PSU...
Страница 114: ...flexitrax flexiprobe Operation Manual 5 System setup www cuesinc com 114 Fig 5 6 Settings menu...
Страница 136: ...flexitrax flexiprobe Operation Manual 5 System setup www cuesinc com 136 Fig 5 16 Yahoo Account security...
Страница 302: ...flexitrax flexiprobe Operation Manual flexitrax flexiprobe OPMAN ENG 07x www cuesinc com 302...